-----QUALITY PRODUCTS, EXCELLENT SERVICE, COMPETITIVE PRICES and PROMPT DELIVERY----
QINGDAO GOLD LUCK PLYWOOD-YUNCHENG TIANYUAN WOODEN Co., Ltd
1. Established in 1996;
2. Specialized in different kinds of wood boards for 20 years more;
3. Owns 12 production lines;
4. Covers 100, 000 square meters;
4. Daily Output: 8x40HQ;
5. Until now, annual export volume above 2 billion.
Particle board, also known as particleboard and chipboard, is an engineered wood product manufactured from wood chips, sawmill shavings, or even sawdust, and a synthetic resin or other suitable binder, which is pressed and extruded. Oriented strand board, also known as flakeboard, waferboard, or chipboard, is similar but uses machined wood flakes offering more strength. All of these are composite materials that belong to the spectrum of fiberboard products.
DISADVANTAGES AND ADVANTAGES OF PARTICLE BOARD:
Particle board is cheaper, denser and more uniform than conventional wood and plywood and is substituted for them when cost is more important than strength and appearance. However, particleboard can be made more attractive by painting or the use of wood veneers onto surfaces that will be visible. Though it is denser than conventional wood, it is the lightest and weakest type of fiberboard, except for insulation board. Medium-density fibreboard and hardboard, also called high-density fiberboard, are stronger and denser than particleboard. Different grades of particleboard have different densities, with higher density connoting greater strength and greater resistance to failure of screw fasteners.
A major disadvantage of particleboard is that it is very prone to expansion and discoloration due to moisture, particularly when it is not covered with paintor another sealer. Therefore, it is rarely used outdoors or in places where there are high levels of moisture, with the exception of some bathrooms, kitchens and laundries, where it is commonly used as an underlayment - in its moisture resistant variant - beneath a continuous sheet of vinyl flooring.
The advantages of using particleboard over veneer core plywood is it is more stable, (unless it gets wet), much cheaper to buy, and somewhat more convenient to use.
Particle board has had an enormous influence on furniture design. In the early 1950s, particle board kitchens started to come into use in furniture construction but, in many cases, it remained more expensive than solid wood. A particle board kitchen was only available to the very wealthy. Once the technology was more developed, particle board became cheaper.
Large companies base their strategies around providing furniture at a low price. They do this by using the least expensive materials possible, as do most other major furniture providers. In almost all cases, this means particle board or MDF or similar. However, manufacturers, in order to maintain a reputation for quality at low cost, may use higher grades of particle board, e.g., higher density particle board, thicker particle board, or particle board using higher-quality resins. One may note the amount of sag in a shelf of a given width in order to draw the distinction.
In general the much lower cost of sheet goods (particle board, medium density fiberboard, and other engineered wood products) has helped to displace solid wood from many cabinetry applications.
Mrs. Zoe Zang
Mobile: 0086-152 8896 8485
|Product Name||(18mm Wood Grain Melamine) Chip Board|
|Material||Wood grains, etc.|
|Thickness(mm)||12mm - 25mm|
|Modulus of Rupture(MOR)||50 MPa|
|Formaldehyde Emission||2.89 mg/L|
|Bonding Strength||above 0.72 MPa and below 1.75 MPa|
|Certification||SGS, FSC, CO, Phytosanitary Certificate, Fumigation/Disinfection Certificate, etc.|
|Price Term||FOB, CIF, CNF, etc.|
|Payment Term||T/T or irrevocable L/C at sight|
|Delivery Time||Within 7 days after deposit or original L/C at sight|
|Packing||Inter packing: 0.2mm plastic film;|
Outer packing: bottom is pallet covered with plastic film; around is carton or plywood strengthened by 3*6 steel belt.
|Features wear-resistant, smooth face and flat board|